Infusion Warmer

Infusion Warmer

Category >> IV Therapy

Temperature control range: ~ 30 °C to 42 °C (or 33 °C-41 °C)

Temperature accuracy: ±0.5 °C to ±1.0 °C

Warm-up time: ≤ 2-5 minutes from ambient (~20-25 °C) to ~36-40 °C

Compatible IV tubing outer diameter: ~3.4 mm-4.5 mm (some models accept up to ~5 mm)

Flow rate capacity: Various; some units designed for rather low flow (<1000 ml/h) while others support higher flows; must check model spec

Power supply: AC 100-240 V, 50/60 Hz

Power consumption: ~≤120 VA (varies)

Dimension & weight: Compact: e.g., ~85×65×175mm / weight ~1.2 kg (some models)

Safety / protection class: Class I, Type B (or equivalent) – degree of protection from electric shock; ingress protection IPX2 or similar

Alarms: Over-temperature, low temperature, sensor fault, door open (in some models)

Operating environment: Ambient temp: ~+5 °C to +35 °C; relative humidity: up to ~80% (typical)

Continuous operation: 24 hours continuous rated

-Confirm the maximum flow rate the warmer supports while still delivering warmed fluid at target exit temperature (important in high-flow transfusions).

-Verify whether the tubing channel is compatible with your local IV set sizes.

-Confirm local voltage/frequency compatibility and whether accessories (hanger, pole clamp, etc.) are included.

-Ask for full certification: CE, ISO 13485, relevant IEC/EN standards for infusion devices, medical device classification.

-Check service/spare parts availability in your country (Bangladesh) – especially heating element, sensors, clamps.

-Ask for a datasheet / user manual from the manufacturer referencing the exact “IP01” model for your tender.

-In tender specification, include: Temperature range & accuracy, flow rate capability, tubing compatibility, warm-up time, power supply, safety protections, mounting options, continuous operation rating